Submissions from 2008
Kinetics of Encephalitozoon spp. infection of human macrophages, Jeffrey Fischer, Diana Tran, Richard Juneau, and Hollie Hale-Donze
Re-engineering of a shifter kart for improved performance, David Freeman, Christopher Bennett, R. Bajon, and S. M. Guo
The effect of two different freezing methods on the immediate post-thaw membrane integrity of adipose tissue derived stem cells, R. Fuller and R. V. Devireddy
Effects of heat affected zones temperature on the general performance of high temperature vacuum tube furnace, A. B.Mahmud Hasan, M. A. Wahab, and S. M. Guo
Effect of particle size dispersion on granular lubrication regimes, Ivan Iordanoff, K. Elkholy, and M. M. Khonsari
Linear squeeze film with constant rotational speed, J. Y. Jang and M. M. Khonsari
Correction factor formula to predict the central and minimum film thickness for shear-thinning fluids in EHL, J. Y. Jang, M. M. Khonsari, and Scott Bair
Correction factor formula to predict the central and minimum film thickness for shear-thinning fluids in ehl, J. Y. Jang, M. M. Khonsari, and Scott Bair
Correlation of residual stress and adhesion on copper by the effect of chemical structure of polyimides for copper-clad laminates, Wonbong Jang, Minbum Seo, Jongchul Seo, Sunggook Park, and Haksoo Han
Fabrication of metal-based high-aspect-ratio microscale structures by compression molding, J. Jiang, Fanghua Mei, and W. J. Meng
Microscale molding replication of Cu- and Ni-based structures, J. Jiang, Fanghua Mei, W. J. Meng, and E. Lara-Curzio
Effects of nanoclay morphology on the mechanical, thermal, and fire-retardant properties of vinyl ester based nanocomposite, G. Ji and G. Li
Experimental study of FRP tube encased concrete cylinders exposed to fire, G. Ji, G. Li, X. Li, S.-S. Pang, and R. Jones
Surface stress-induced structural reorientation and, pseudoelastic effect in Pd nanowires, Lao Jijun and Dorel Moldovan
A production-delivery inventory system under continuous price decrease and finite planning horizon, Yu Junfang, Bhaba R. Sarker, and Deniz Mungan
Numerical simulation of local temperature distortions during ice nucleation of cells in suspension, D. Kandra and R. V. Devireddy
Incorporation of THD boundary conditions for the efficient evaluation of journal bearing performance, P. S. Keogh and M. M. Khonsari
Guest Editorial, M. Khonsari
Special issue on granular lubrication, M. Khonsari
Applied Tribology: Bearing Design and Lubrication, Michael M. Khonsari
Applied Tribology: Bearing Design and Lubrication: Second Edition, Michael M. Khonsari and E. Richard Booser
Avoiding stick-slip chatter in low-speed bearings, M. M. Khonsari and E. R. Booser
Gas-liquid two-phase flow in hot embossed square microchannels, Namwon Kim, Estelle T. Evans, Daniel S. Park, Dimitris E. Nikitopoulos, Steven A. Soper, and Michael C. Murphy
Rocket nozzle payload design for a high-altitude student platform, Jeffrey A. Kornuta and S. M. Guo
Scale effects in generalized Newtonian elastohydrodynamic films, Ilya I. Kudish, P. Kumar, M. M. Khonsari, and Scott Bair
Combined effects of shear thinning and viscous heating on EHL characteristics of rolling/sliding line contacts, Punit Kumar and M. M. Khonsari
Effect of starvation on traction and film thickness in thermo-EHL line contacts with shear-thinning lubricants, Punit Kumar and M. M. Khonsari
EHL circular contact film thickness correction factor for shear-thinning fluids, Punit Kumar and M. M. Khonsari
Molecular dynamics simulation study of pseudoelastic effects in palladium nanowires, Jijun Lao and Dorel Moldovan
Surface stress induced structural transformations and pseudoelastic effects in palladium nanowires, Jijun Lao and Dorel Moldovan
Design and fabrication of a ligase detection reaction (LDR) microchip with an integrated passive micromixer, Tae Yoon Lee, Dimistris E. Nikitopoulos, Daniel S. Park, Steven A. Soper, and Michael C. Murphy
A crumb rubber modified syntactic foam, G. Li and M. John
A self-healing smart syntactic foam under multiple impacts, G. Li and M. John
A cement based syntactic foam, G. Li and V.D. Muthyala
Impact characterization of sandwich structures with an integrated orthogrid stiffened syntactic foam core, G. Li and V.D. Muthyala
Fabricating, testing, and modeling of advanced grid stiffened fiber reinforced polymer tube encased concrete cylinders, G. Li and R.C. Velamarthy
Wind tunnel tests for mean drag and lift coefficients on multiple circular cylinders arranged in-line, Xianzhi Liu, Marc Levitan, and Dimitris Nikitopoulos
A note on the lubricating film in hydrostatic mechanical face seals, Z. Luan and M. M. Khonsari
Experimental analysis of journal bearings undergoing oscillatory motion, Xiaobin Lu and Michael M. Khonsari
An Experimental Study of Oil-Lubricated Journal Bearings Undergoing Oscillatory Motion, Xiaobin Lu and M. M. Khonsari
Analysis of engineering discipline grade trends, Charles D. Mcallister, Xiaoyue Jiang, and Fereydoun Aghazadeh
Evaluation of bond quality and heat transfer of Cu-based microchannel heat exchange devices, Fanghua Mei, J. Jiang, and W. J. Meng
Evaluation of eutectic bond strength and assembly of Al-based microfluidic structures, Fanghua Mei, J. Jiang, and W. J. Meng
Fabrication, assembly, and testing of Cu- and Al-based microchannel heat exchangers, Fanghua Mei, Pritish R. Parida, Jing Jiang, Wen Jin Meng, and Srinath V. Ekkad
Direct microscale imprinting of Al at room temperature with Si inserts, W. J. Meng, J. Jiang, Fanghua Mei, G. B. Sinclair, and Sunggook Park
Major factors influencing productivity of water and wastewater treatment plant construction: Evidence from the deep south USA, Shahriyar Mojahed and Fereydoun Aghazadeh
A CaO enhanced rubberized syntactic foam, J. Nji and G. Li
Umbrella sampling simulations of the closure of biotin carboxylase, Brian R. Novak, Dorel Moldovan, Grover L. Waldrop, and Marcio S. De Queiroz
Leidenfrost liquid droplets on micro/nano ratchets, Jeong Tae Ok, Eugene Lopez-Oña, Harris Wong, and Sunggook Park
Computational analysis of dissipative heating due to impact between a micro-particle cluster and a deformable wall, Rohan Panchadhar and Keith A. Gonthier
Optimization of the geometry for continuous flow PCR devices in a titer plate-based PCR multi-reactor platform, D. S. Park, P. C. Chen, B. H. You, N. Kim, T. Park, P. Datta, Y. Desta, S. A. Soper, D. E. Nikitopoulos, and M. C. Murphy
Small footprint continuous flow PCR devices for a 96-well CFPCR multi-reactor platform, D. S. Park, P. C. Chen, B. H. You, N. Kim, T. Park, T. Y. Lee, P. Datta, Y. Desta, S. A. Soper, D. E. Nikitopoulos, et al.
A titer plate-based polymer microfluidic platform for high throughput nucleic acid purification, D. S.W. Park, M. L. Hupert, M. A. Witek, B. H. You, P. Datta, J. Guy, J. B. Lee, S. A. Soper, D. E. Nikitopoulos, and M. C. Murphy
Analysis of gas dynamic waves in explosively actuated valves, Blaise H. Paul, Keith A. Gonthier, and Brett S. Okhuysen
Fabrication of free-standing polymer membranes via imprint lithography and selective immobilization of lipid vesicles at micropores in the membrane, Anish Roychowdury, Junseo Choi, Alum Yi, Feng Xu, and Sunggook Park
Heat transfer and pressure measurements in a lattice-cooled trailing edge of a turbine airfoil, Krishnendu Saha, Shengmin Guo, Sumanta Acharya, and Chiyuki Nakamata
Estimation of throughput capacity for convoy movement, Bhaba R. Sarker and E. Alex Baylot
Optimal batch sizing in a multi-stage production system with rework consideration, Bhaba R. Sarker, A. M.M. Jamal, and Sanjay Mondal
Modern Applications of Nanotechnology in Textiles, A.P.S. Sawhney, B. Condon, K.V. Singh, S.S. Pang, G. li, and D. Hui
Heat/mass transfer in rotating, smooth, high aspect-ratio (4:1) coolant channels with curved walls in 90° and 45° orientation, Eashwar Sethuraman, Dimitris E. Nikitopoulos, and Sumanta Acharya
Simulation study on stress and deformation of polymeric patterns during the demolding process in thermal imprint lithography, Zhichao Song, Junseo Choi, Byoung Hee You, Jaejong Lee, and Sunggook Park
Study on demolding temperature in thermal imprint lithography via finite element analysis, Zhichao Song, Byoung Hee You, Jaejong Lee, and Sunggook Park
Effects of oil inlet pressure and inlet position of axially grooved infinitely long journal bearings. Part I: Analytical solutions and static performance, J. K. Wang and M. M. Khonsari
Effects of oil inlet pressure and inlet position of axially grooved infinitely long journal bearings. Part II: Nonlinear instability analysis, J. K. Wang and M. M. Khonsari
Basic solution of four parallel non-symmetric permeable Mode-III cracks in a piezoelectric/piezomagnetic composite plane, Z.-G. Zhou, P.-W. Zhang, and G.-Q. Li
Submissions from 2007
Intracellular ice formation in cell suspensions measured using a cryomicroscope and a calorimeter, Tathagata Acharya and Ram V. Devireddy
Mechanics in naturally compliant structures, M. S. Alam, M. A. Wahab, and C. H. Jenkins
System modeling of explosively actuated valves, Adam M. Brand, Keith A. Gonthier, and Michele E. Decroix
Fabrication of high-aspect-ratio microscale Ta mold inserts with micro electrical discharge machining, D. M. Cao, J. Jiang, J. Jiang, W. J. Meng, and W. Wang
Metal micromolding: Further experiments and preliminary finite element analysis, D. M. Cao, J. Jiang, W. J. Meng, and G. B. Sinclair
Adhesively bonded smart composite joints: An overview, J. Cheng, G. Li, and S.-S. Pang
Analysis of an adhesively bonded single-strap joint integrated with shape memory alloy (SMA) reinforced layers, J. Cheng, X. Wu, G. Li, S.-S. Pang, and F. Taheri
Design and analysis of a smart composite pipe joint system integrated with piezoelectric layers under bending, J. Cheng, X. Wu, G. Li, S.-S. Pang, and F. Taheri
Design and analysis of a smart adhesive single-strap joint system integrated with the piezoelectrics reinforced composite layers, J. Cheng, X. Wu, G. Li, F. Taheri, and S.-S. Pang
Assessment and improvement of the thermal performance of a polycarbonate micro Continuous Flow Polymerase Chain Reactor (CFPCR), Pin Chuan Chen, Michael W. Mitchell, Dimitris E. Nikitopoulos, Steven A. Soper, and Michael C. Murphy
Replication of reliable assembly features for polymer modular microfluidic systems, Pin Chuan Chen, Byoung Hee You, Daniel S. Park, Sunggook Park, Jason Guy, Dimitris E. Nikitopoulos, Steven A. Soper, and Michael C. Murphy
Operations policy for a supply chain system with fixed-interval delivery and linear demand, A. Diponegoro and B. R. Sarker
Granular collision lubrication: Experimental investigation and comparison to theory, Karim N. Elkholy and M. M. Khonsari
Effects of applied substrate bias during reactive sputter deposition of nanocomposite tantalum carbide/amorphous hydrocarbon thin films, R. D. Evans, G. L. Doll, W. J. Meng, F. Mei, and J. T. Glass
Cryopreservation characteristics of adipose-derived stem cells: maintenance of differentiation potential and viability, Brian C. Goh, Sreedhar Thirumala, Gail Kilroy, Ram V. Devireddy, and Jeffrey M. Gimble
Predictions for the impact of a granular solid having spatially non-uniform bulk porosity, Keith A. Gonthier and Carey F. Cox
Modeling of an explosively driven micro-valve, Keith A. Gonthier, Biaise H. Paul, Adam M. Braud, and Michele E. Decroix
The study of thermal properties and micro structures of YSZ, S. M. Guo, M. B. Silva, Patrick F. Mensah, and Nalini Uppu
Analytical modeling of three-layered HMA mixtures, B. Huang, X. Shu, G. Li, and L. Chen
Evaluation of micromilled metal mold masters for the replication of microchip electrophoresis devices, Mateusz L. Hupert, W. Jason Guy, Shawn D. Llopis, Hamed Shadpour, Sudheer Rani, Dimitris E. Nikitopoulos, and Steven A. Soper
Impact and post impact response of laminated beams at low temperatures, S.I. Ibekwe, P.F. Mensah, G. Li, S.-S. Pang, and M.A. Stubblefield
On the elastohydrodynamic analysis of shear-thinning fluids, J. Y. Jang, M. M. Khonsari, and S. Bair
Effects of internal linkage groups of fluorinated diamine on the optical and dielectric properties of polyimide thin films, Wonbong Jang, Daeyong Shin, Seunghyuk Choi, Sunggook Park, and Haksoo Han
Further experiments and modeling for microscale compression molding of metals at elevated temperatures, J. Jiang, W. J. Meng, G. B. Sinclair, and E. Lara-Curzio
Replication of metal-based microscale structures, J. Jiang, W. J. Meng, G. B. Sinclair, C. O. Stevens, and E. Lara-Curzio
Membrane transport properties of equine and macaque ovarian tissues frozen in mixtures of dimethylsulfoxide and ethylene glycol, A. Kardak, S. P. Leibo, and R. Devireddy
Deposition of particles on ocular tissues and formation of Krukenberg spindle, hyphema, and hypopyon, Satish Kumar, Sumanta Acharya, and Roger Beuerman
Microstructure enhanced heat exchanger for pressurized water reactor, K. Lian, M. Zhang, G. Li, S.-S. Pang, Z.-G. Ling, C.-G. Liu, and S. Ibekwe
Experimental study of hybrid composite cylinders, G. Li
A generalized analytical modeling of grid stiffened composite structures, G. Li and J. Cheng
Experimental study of hybrid composite beams, G. Li, M. John, and D. Maricherla
Development of rubberized syntactic foam, G. Li and N. Jones
Advanced grid stiffened fiber reinforced plastic tube encased concrete cylinders, G. Li and D. Maricherla
Online tribology ball bearing fault detection and identification, B. Ling and M. M. Khonsari
Computational fluid dynamics analysis of turbulent flow within a mechanical seal chamber, Zhaogao Luan and M. M. Khonsari