Submissions from 2006
Effect of glycerol and cholesterol-loaded cyclodextrin on freezing-induced water loss in bovine spermatozoa, G. Li, J. Saenz, R. A. Godke, and R. V. Devireddy
Subzero water transport characteristics and optimal rates of freezing rhesus monkey (Macaca Mulatta) ovarian tissue, G. Li, S. Thirumala, S. P. Leibo, and R. V. Devireddy
Fusion and visualization of 3D image and elevation data in Computer Automated Virtual Environment (CAVE), X. Li, M.A. Stubblefield, G. Li, and H.D. Jerro
Numerical simulations of the flow field around the rings of mechanical seals, Zhaogao Luan and M. M. Khonsari
On the lift-off speed in journal bearings, Xiaobin Lu and Michael M. Khonsari
The Stribeck curve: Experimental results and theoretical prediction, Xiaobin Lu, M. M. Khonsari, and E. R.M. Gelinck
Grain-boundary grooving by surface diffusion with asymmetric and strongly anisotropic surface energies, Donghong Min and Harris Wong
Rayleigh's instability of Lennard-Jones liquid nanothreads simulated by molecular dynamics, Donghong Min and Harris Wong
The effect of strong surface energy anisotropy on migrating grain-boundary grooves, Donghong Min and Harris Wong
On active control of film-cooling flows, Dimitris E. Nikitopoulos, Jeremiah Oertling, Sumanta Acharya, and Frank H. Muldoon
Microtiter plate-based microfluidic platforms: Sealing, leakage testing, and performance of a 96-well SPRI device, D. S. Park, M. Hupert, J. Guy, P. Datta, J. B. Lee, M. Witek, B. H. You, S. A. Soper, D. E. Nikitopoulos, and M. C. Murphy
A thermohydrodynamic analysis of foil journal bearings, Z. C. Peng and M. M. Khonsari
The effect of methanol on lipid bilayers: An atomistic investigation, D. Pinisetty, D. Moldovan, and R. Devireddy
Simulation of electroosmotic and pressure driven flows in microfluidic interconnects, Sudheer D. Rani, Steven A. Soper, Dimitris E. Nikitopoulos, and Michael C. Murphy
Erratum to "Optimal ordering policies in response to discount offer" [International Journal of Production Economics 100 (2006) 195-211] (DOI:10.1016/j.ijpe.2004.10.015), Bhaba R. Sarker and Mahmood Al Kindi
Optimal ordering policies in response to a discount offer, Bhaba R. Sarker and Mahmood Al Kindi
Method of regulating or controlling a cyclically operating internal combustion engine, Ingmar Schoegl
Mass/heat transfer in rotating, smooth, high-aspect ratio (4:1) coolant channels with curved walls, Eashwar Sethuraman, Dimitris E. Nikitopoulos, and Sumanta Acharya
Semantic image retrieval based on probabilistic latent semantic analysis, Amin Shah-Hosseini and Gerald M. Knapp
Free vibration and physical parameter identification of non-uniform composite beams, K.V. Singh, G. Li, and S.-S. Pang
Analysis of heat partitioning in wheel/rail and wheel/brake shoe friction contact: An analytical approach, A. Tudor and M. Khonsari
Effect of pressure suit on functional reach, Nageswara Rao Uppu, Fereydoun Aghazadeh, and Larry Nabatilan
Experimental and numerical simulation of restraining forces in gas metal arc welded joints, M. A. Wahab, M. S. Alam, M. J. Painter, and P. E. Stafford
Effect of corrosion prevention compounds on fatigue life in 2024-T3 aluminum alloy, M. A. Wahab, J. H. Park, M. S. Alam, and S. S. Pang
A new derivation for journal bearing stiffness and damping coefficients in polar coordinates, J. K. Wang and M. M. Khonsari
Application of Hopf bifurcation theory to rotor-bearing systems with consideration of turbulent effects, J. K. Wang and M. M. Khonsari
Bifurcation analysis of a flexible rotor supported by two fluid-film journal bearings, J. K. Wang and M. M. Khonsari
Influence of inlet oil temperature on the instability threshold of rotor-bearing systems, J. K. Wang and M. M. Khonsari
Influence of Inlet Oil Temperature on the Instability Threshold of Rotor-Bearing Systems, J. K. Wang and M. M. Khonsari
On the hysteresis phenomenon associated with instability of rotor-bearing systems, J. K. Wang and M. M. Khonsari
Prediction of the stability envelope of rotor-bearing system, J. K. Wang and M. M. Khonsari
Evaluation of critical design factors on tfhe thermal behavior due to frictional heat in the oscillatory sliding conformal contact, P. Wang, D. Y. Hua, M. Mansouri, and M. M. Khonsari
Optimal models for a multi-stage supply chain system controlled by kanban under just-in-time philosophy, Shaojun Wang and Bhaba R. Sarker
Relation between grain growth and grain-boundary diffusion in a pure material by molecular dynamics simulations, V. Yamakov, D. Moldovan, K. Rastogi, and D. Wolf
Numerical simulation and fabrication of microscale, multilevel, tapered mold inserts using UV-Lithographie, Galvanoformung, Abformung (LIGA) technology, Ren Yang, J. Jiang, W. J. Meng, and Wanjun Wang
Passive alignment structures in modular, polymer microfluidic devices, Byoung Hee You, Pin Chuan Chen, Jason Guy, Proyag Datta, Dimitris E. Nikitopoulos, Steven A. Soper, and Michael C. Murphy
Tolerance variation and passive alignment in modular, polymer microfluidic devices, Byoung Hee You, Daniel S. Park, Christipher W. Mock, Wilfredo M. Caceres, Dimitris E. Nikitopoulos, Steven A. Soper, and Michael C. Murphy
A directional decomposition heuristic for one-dimensional, non-equidistant machine-cell location problems, Junfang Yu and Bhaba R. Sarker
Submissions from 2005
A new approach for modeling of fatigue crack growth in welded cruciform and curve T joint structures, Mohammad S. Alam and Muhammad A. Wahab
Finite element modeling of fatigue crack growth in curved-welded joints using interface elements, M. S. Alam and M. A. Wahab
Modeling the fatigue crack growth and propagation life of a joint of two elastic materials using interface elements, M. S. Alam and M. A. Wahab
Friction and wear of a rubber coating in fretting, Dae Kyun Baek and M. M. Khonsari
Generalized Reynolds equations for line contact with double-Newtonian shear-thinning, Scott Bair and M. M. Khonsari
Reynolds equations for common generalized newtonian models and an approximate Reynolds-Carreau equation, Scott Bair and M. M. Khonsari
The effect of initial microstructural characteristics on abnormal grain growth in single-phase materials: A mesoscopic simulation study, Rakesh K. Behera and Dorel Moldovan
Economic order quantity for a jit production system with minimal downtime, Pablo Biswas and Bhaba R. Sarker
Electrokinetically synchronized polymerase chain reaction microchip fabricated in polycarbonate, Jifeng Chen, Musundi Wabuyele, Hengwu Chen, Donald Patterson, Mateusz Hupert, Hamed Shadpour, Dimitris Nikitopoulos, and Steven A. Soper
Joint optimization of process improvement investments for supplier-buyer cooperative commerce, E. J. Comeaux and B. R. Sarker
Predicted permeability parameters of human ovarian tissue cells to various cryoprotectants and water, Ram V. Devireddy
Cellular response of adipose derived passage-4 adult stem cells to freezing stress, Ram V. Devireddy, Sreedhar Thirumala, and Jeffrey M. Gimble
Effects of microstructural inhomogeneity on dynamic grain growth during large-strain grain boundary diffusion-assisted plastic deformation, R. Ding, D. Moldovan, V. Yamakov, D. Wolf, and S. R. Phillpot
The experimental and computational study of a new cooling strategy for turbomachinery rotational components, N. I. Elhabeshi and S. M. Guo
Oscillating drop/bubble tensiometry: Effect of viscous forces on the measurement of interfacial tension, E. M. Freer, H. Wong, and C. J. Radke
Modeling shear enhanced compaction of granular explosive, K. A. Gonthier
Multiscale shock heating analysis of a granular explosive, Keith A. Gonthier and Venugopal Jogi
The simulation of a PEMFC with an interdigitated flow field design, S. M. Guo
An inverse approach to determine solute and solvent permeability parameters in artificial tissues, Yimeng He and Ram V. Devireddy
Three-layered hot-mix asphalt mixture, B. Huang, G. Li, and X. Shu
Laboratory investigation of mixing hot-mix asphalt with reclaimed asphalt pavement, B. Huang, G. Li, D. Vukosavljevic, X. Shu, and B.K. Egan
Laboratory investigation of portland cement concrete containing recycled asphalt pavements, B. Huang, X. Shu, and G. Li
Physiological fatigue limit of combined manual materials handling tasks, Hardianto Iridiastadi and Fereydoun Aghazadeh
Erratum: Optimal manufacturing batch size with rework process at a single-stage production system (Computers and Industrial Engineering (2004) 47: 1 (77-89) DOI: 10.1016/j.cie.2004.03.001), A. M.M. Jamal, Bhaba R. Sarker, and Sanjay Mondal
On the granular lubrication theory, J. Y. Jang and M. M. Khonsari
Enhancement of post-thaw viability of cells in suspension via pulsed laser heating prior to immersion in liquid nitrogen, Deepak Kandra, T. T. Charalampopoulos, and Ram V. Devireddy
Numerically predicted thermal distortions due to nucleation of cells embedded in an extracellular suspension, Deepak Kandra and Ram Devireddy
Fingering instability of a retracting solid film edge, Wanxi Kan and Harris Wong
A dry subject, M. M. Khonsari and E. R. Booser
Tribological study of microbearings for MEMS applications, Daejong Kim, Dongmei Cao, Michael D. Bryant, Wenjin Meng, and Frederick F. Ling
Thermomechanical analysis of oscillatory pin-bushing performance, Rajesh Krithivasan and Michael M. Khonsari
Pressure-velocity correlation study on 1:50 geometrical scale model of the TTU building, Praveen Kumar, D. E. Nikitopoulos, and Marc L.levitan
Erratum: A real-time monitoring and intelligent decisions-making platform for enhanced radio resource management in wireless cellular systems (Wireless Personal Communications (2005) 30 (77-95)), S. Kyriazakos, E. Gkroustiotis, C. Karambalis, G. Karetsos, C. Kechagias, D. Nikitopoulos, N. Papaoulakis, and K. Vlahodimitropoulos
Wind tunnel tests on equal and unequal diameter cylinders in tandem, Xianzhi Liu, Marc L. Levitan, Sriram Narasimhan, and Dimitris Nikitopoulos
Traffic capacity under air quality constraints, X.G. Li, G.Q. Li, S.S. Pang, M.A. Stubblefield, and C.G. Wilmot
On the lift-off speed in journal bearings, X. Lu and M. M. Khonsari
The effects of feeding configurations to water flooding and general performance of a proton exchange membrane fuel cell, A. B. Mahmud Hasan, S. M. Guo, and S. V. Ekkad
Surface temperature in oscillating sliding interfaces, M. Mansouri and M. M. Khonsari
Theoretical and experimental investigation of frictional and thermal behavior in oscillatory sliding line contact, M. Mansouri, M. M. Khonsari, and D. Y. Hua
Thermal influemce on torque transfer of wet clutches in limited slip differential applications, Pär Marklund, Rikard Mäki, Roland Larsson, Erik Höglund, Michael M. Khonsari, Joonyoung Jang, Bager Ganemi, and Richard Olsson
Stresses during micromolding of metals at elevated temperatures: Pilot experiments and a simple model, W. J. Meng, D. M. Cao, and G. B. Sinclair
Nanoscale measurements of water loss during desiccation of biological cell suspensions, S. Mittal and R. V. Devireddy
Comparison of current U.S. and Canadian cigarette pack warnings, Ashish Nimbarte, Fereydoun Aghazadeh, and Craig Harvey
Effect of back belt on inter-joint coordination and postural index, Ashish D. Nimbarte, Fereydoun Aghazadeh, and Craig M. Harvey
A molecular dynamics simulation study on the effect of methanol on the structural characteristics of lipid bilayerS, Dinesh Pinisetty, Dorel Moldovan, and Ram Devireddy
Atomistic simulations of water permeation through biological membranes, Dinesh Pinisetty, Dorel Moldovan, and Ram Devireddy
Microfabricated arrays of thermoelectric coolers for highly localized control of temperature in biological systems, Aparna Prabhakar, Elizabeth Podlaha-Murphy, Michael Murphy, and Ram Devireddy
Electrodeposition characteristics of bismuth-telluride films, A. Prabhakar, E. J. Podlaha-Murphy, M. C. Murphy, and R. V. Devireddy
A thermodynamic approach for predicting fretting fatigue life, S. M. Quraishi, M. M. Khonsari, and D. K. Baek
The effect of microstructural inhomogeneity on grain boundary diffusion creep, Kanishk Rastogi and Dorel Moldovan
Route planning for automated guided vehicles in a manufacturing facility, B. R. Sarker and S. S. Gurav
Deposition of highly hydrogenated carbon films by a modified plasma assisted chemical vapor deposition technique, B. Shi, W. J. Meng, R. D. Evans, and N. Hershkowitz
A simplified thermohydrodynamic stability analysis of journal bearings, S. Singhal and M. M. Khonsari
Damage identification in composite structures from vibration data, K.V. Singh, G. Li, R.A. Jones, and S.-S. Pang
Identification of composite beam parameters from vibration data, K.V. Singh, G. Li, S.-S. Pang, and Y.M. Ram
Home cholesterol test kits: Helpful or harmful?, Deepti Surabattula, Craig M. Harvey, Jennifer C. Rood, and Fereydoun Aghazadeh
A simplified procedure to determine the optimal rate of freezing biological systems, Sreedhar Thirumala and Ram V. Devireddy
Transport phenomena during freezing of adipose tissue derived adult stem cells, Sreedhar Thirumala, Jeffrey M. Gimble, and Ram V. Devireddy
A theoretically estimated optimal cooling rate for the cryopreservation of sperm cells from a live-bearing fish, the green swordtail Xiphophorus helleri, Sreedhar Thirumala, Changjiang Huang, Qiaoxiang Dong, Terrence R. Tiersch, and Ram V. Devireddy
Effect of imposed thermal history on post thaw survival of Adipose Derived Adult Stem (ADAS) cells: A parametric study, Sreedhar Thirumala, Sanjin Zvonic, Elizabeth Floyd, Jeffrey Gimble, and Ram Devireddy
Theoretical prediction of optimal cooling rates for human Adipose Derived Adult Stem (ADAS) cells, Sreedhar Thirumala, Sanjin Zvonic, Elizabeth Floyd, Jeffrey Gimble, and Ram Devireddy
Effect of various freezing parameters on the immediate post-thaw membrane integrity of adipose tissue derived adult stem cells, Sreedhar Thirumala, Sanjin Zvonic, Elizabeth Floyd, Jeffrey M. Gimble, and Ram V. Devireddy