Submissions from 2002
Response to technical note on ‘manufacturing batch size and ordering policy for products with shelf lives’, Bhaba R. Sarker and Mahbubur R. Chowdhury
Common parts grouping heuristic: An iterative procedure to cell formation, David Sathiaraj and Bhaba R. Sarker
Intrinsic stress development in Ti-C:H ceramic nanocomposite coatings, B. Shi, W. J. Meng, L. E. Rehn, and P. M. Baldo
Interaction of physical and mental work, Sukhvinder Singh, Fereydoun Aghazadeh, and Thomas G. Ray
Bubbly pipe flow study via refractive index matching, K. N. Stanley, D. E. Nikitopoulos, and M. A. Khan
Equipment assignment to multiple overhaul blocks in series systems, Md Shabbir Talukder and Gerald M. Knapp
Locating cells with bottleneck machines in cellular manufacturing systems, Shaojun Wang and Bhaba R. Sarker
Coupled grooving and migration of inclined grain boundaries: Regime I, H. F. Zhang and H. Wong
Coupled grooving and migration of inclined grain boundaries: Regime II, H. F. Zhang and H. Wong
Evaporation, condensation, and flow in an idealized micro heat pipe, Jin Zhang and Harris Wong
Evaporation, condensation, and flow in an idealized micro heat pipe, Jin Zhang and Harris Wong
Submissions from 2001
Heat transfer enhancements in rotating two-pass coolant channels with profiled ribs: Part 1-average results, S. Acharya, V. Eliades, and D. E. Nikitopoulos
Visualization and two-color DPIV measurements of flows in circular and square coaxial nozzles, J. W. Bitting, D. E. Nikitopoulos, S. P. Gogineni, and E. J. Gutmark
Friction and wear characteristics of ceramic nanocomposite coatings: Titanium carbide/amorphous hydrocarbon, D. M. Cao, B. Feng, W. J. Meng, L. E. Rehn, P. M. Baldo, and M. M. Khonsari
Amorphous hydrocarbon based thin films for high-aspect-ratio MEMS applications, D. M. Cao, T. Wang, B. Feng, W. J. Meng, and K. W. Kelly
Manufacturing batch size and ordering policy for products with shelf lives, Mahbubur R. Chowdhury and Bhaba R. Sarker
Mass-Transfer Distribution in Rotating, Two-Pass, Ribbed Channels with Vortex Generators, V. Eliades, D. E. Nikitopoulos, and S. Acharya
Characterization of microstructure and mechanical behavior of sputter deposited Ti-containing amorphous carbon coatings, B. Feng, D. M. Cao, W. J. Meng, J. Xu, R. C. Tittsworth, L. E. Rehn, P. M. Baldo, and G. L. Doll
A fuzzy scheme for failure mode screening, Daniel J. Fonseca and Gerald M. Knapp
Impact response of a composite laminate bonded to a metal substrate, J.E. Helms, G. Li, and S.-S. Pang
Analysis of grid stiffened cylinders, J.E. Helms, G. Li, and B.H. Smith
Influence of temperature variation on the post impact strength of Glass Fiber Composite materials, Samuel I. Ibekwe, Guoqiang Li, Patrick F. Mensah, and Su Seng Pang
Influence of temperature variation on the post impact strength of Glass Fiber Composite materials, S.I. Ibekwe, G. Li, P.F. Mensah, and S.-S. Pang
Experimental and analytical strength characterization of an ultrasonic welded lap shear joint, S. Ibekwe, P.F. Mensah, G. Joshi, G. Li, and M. Stubblefield
On the thermohydrodynamic analysis of a Bingham fluid in slider bearings, J. Y. Jang and M. M. Khonsari
Development of a heat-activated coupling for composite pipe systems, R.A. Jones, S.-S. Pang, G. Li, R.H. Lea, and M.A. Stubblefield
Influence of inlet conditions on the thermohydrodynamic state of a fully circumferentially grooved journal bearing, P. S. Keogh and M. M. Khonsari
Durability of FRP strengthened RC beams subjected to hygrothermal and aging attacks, G. Li, J.E. Helms, S.-S. Pang, and S.I. Ibekwe
Analytical modeling of tensile strength of particulate-filled composites, G. Li, J.E. Helms, S.-S. Pang, and K. Schulz
Joining composite pipes using hybrid heat-activated coupling and adhesive bonding, G. Li, S.-S. Pang, J.E. Helms, R.J. Jones, and E. Woldesenbet
Investigation of prepreg bonded composite single lap joint, G. Li, S.-S. Pang, E. Woldesenbet, M.A. Stubblefield, P.F. Mensah, and S.I. Ibekwe
Joining composite pipes using hybrid heat-activated coupling and adhesive bonding, Guoqiang Li, Su Seng Pang, Jack E. Helms, Randy J. Jones, and Eyassu Woldesenbet
Thermal and dynamic characterization of wet clutch engagement with provision for drive Torque, M. Mansouri, M. Holgerson, M. M. Khonsari, and W. Aung
Modeling of heat-activated coupled composite pipes in a cryogenic thermal environment, P.F. Mensah, M.A. Stubblefield, O. Soysal, and G. Li
Numerical model for thermal and material characterization of FRP composite pipes exposed to hydrocarbon fire, P.F. Mensah, M.A. Stubblefield, O. Soysal, and G. Li
Heat transfer enhancements in rotating two-pass coolant channels with profiled ribs: Part 2-detailed measurements, D. E. Nikitopoulos, V. Eliades, and Acharya S
Nonlinear three-mode interactions in a developing mixing layer, D. E. Nikitopoulos and J. T.C. Liu
Influence of ultraviolet radiation on the Low velocity impact response of laminated composite, S.-S. Pang, J.E. Helms, G. Li, and S.I. Ibekwe
Influence of ultraviolet radiation on the low velocity impact response of laminated beams, S.-S. Pang, G. Li, J.E. Helms, and S.I. Ibekwe
Scuffing failure of hydrodynamic bearings due to an abrasive contaminant partially penetrated in the bearing over-layer, Mircea D. Pascovici and M. M. Khonsari
Measures of grouping efficiency in cellular manufacturing systems, Bhaba R. Sarker
A comparison of existing grouping efficiency measures and a new weighted grouping efficiency measure, Bhaba R. Sarker and Muslema Khan
Designing a mixed-model, open-station assembly line using mixed-integer programming, B. Sarker and H. Pan
Job routing and operations scheduling: A network-based virtual cell formation approach, B. R. Sarker and Z. Li
Designing a mixed-model, open-station assembly line using mixed-integer programming, B. R. Sarker and H. Pan
Design configuration for a closed-station, mixed-model assembly line: A filing cabinet manufacturing system, B. R. Sarker and Haixu Pan
A new continuum scalar model of facets, Tinghui Xin and Harris Wong
A δ-function model of facets, Tinghui Xin and Harris Wong
Submissions from 2000
Heat transfer enhancements in rotating two-pass coolant channels with profiled ribs: Part 1- average results, S. Acharya, V. Eliades, and D. E. Nikitopoulos
Mass/heat transfer in a ribbed passage with cylindrical vortex generators: The effect of generator-rib spacing, S. Acharya, R. G. Hibbs, Y. Chen, and D. E. Nikitopoulos
A strategy to design a work-rest schedule for VDT operators performing data entry and mental tasks, Rana Balci and Fereydoun Aghazadeh
Detailed mass transfer distribution in a ribbed coolant passage with a 180° bend, Y. Chen, D. E. Nikitopoulos, R. Hibbs, S. Acharya, and T. A. Myrum
Expert system for reliability centered maintenance in the chemical industry, D. J. Fonseca and G. M. Knapp
Visualization and dpiv measurements of non-circular coaxial jet flows, Sivaram Gogineni, Jason W. Bitting, and Dimitris E. Nikitopoulos
A similarity coefficient measure and machine-parts grouping in cellular manufacturing systems, Khan Md Saiful Islam and Bhaba R. Sarker
Optimal payment time for a retailer under permitted delay of payment by the wholesaler, A. M.M. Jamal, Bhaba R. Sarker, and Shaojun Wang
An ARTMAP neural network-based machine condition monitoring system, Gerald M. Knapp, Roya Javadpour, and Hsu Pin Wang
Low velocity impact response of GFRP laminates subjected to cycling moistures, G. Li, S.-S. Pang, J.E. Helms, and S.I. Ibekwe
Micromechanical modeling of polymer modified asphalt at low temperatures, G. Li, S.-S. Pang, and Y. Zhao
Deposition of thin film ceramics and ceramic nanocomposites by inductively coupled plasma assisted hybrid chemical/physical vapor deposition, Wen Jin Meng, Bao Feng, and Dong Mei Cao
Inductively coupled plasma assisted deposition and mechanical properties of metal-free and Ti-containing hydrocarbon coatings, W. J. Meng, E. I. Meletis, L. E. Rehn, and P. M. Baldo
Ti atomic bonding environment in Ti-containing hydrocarbon coatings, W. J. Meng, R. C. Tittsworth, J. C. Jiang, B. Feng, D. M. Cao, K. Winkler, and V. Palshin
Mechanical properties and microstructure of TiC/amorphous hydrocarbon nanocomposite coatings, W. J. Meng, R. C. Tittsworth, and L. E. Rehn
Heat transfer enhancements in rotating two-pass coolant channels with profiled ribs: Part2- detailed measurements, D. E. Nikitopoulos, V. Eliades, and S. Acharya
Comparisons between circular and square coaxial jet flows, Dimitris E. Nikitopoulos, Jason W. Bitting, and Sivaram Gogineni
Flow characteristics of a powder lubricant in a slider bearing, Manjunath Pappur and M. M. Khonsari
Optimal payment time under permissible delay in payment for products with deterioration, Bhaba R. Sarker, A. M.M. Jamal, and Shaojun Wang
Supply chain models for perishable products under inflation and permissible delay in payment, Bhaba R. Sarker, A. M.M. Jamal, and Shaojun Wang
Designing multi-product lines: Job routing in cellular manufacturing systems, Bhaba R. Sarker and Y. I. Xu
Designing multi-product lines: Job routing in cellular manufacturing systems, Bhaba R. Sarker and Yi Xu
An accurate, flexible, parallel poisson solver with direct sub-structuring for complex geometries, Konstantinos M. Voyages and Dimitris E. Nikitopoulos
Periodic mass shedding of a retracting solid film step, H. Wong, P. W. Voorhees, M. J. Miksis, and S. H. Davis
Self-similar growth of a compound layer in thin-film binary diffusion couples, H. F. Zhang and H. Wong
A self-similar solution for the growth rate of a compound layer in thin-film binary diffusion couples, Huifang Zhang and Harris Wong
Flow characteristics of a powder lubricant sheared between parallel plates, Lei Zhou and M. M. Khonsari
Submissions from 1999
Co-current and counter-current migration of gas kicks in `horizontal' wells, H. Baca, D. E. Nikitopoulos, J. Smith, and A. T. Bourgoyne
Detailed mass transfer distribution in rotating, two-pass ribbed coolant channels with vortex generators, V. Eliades, D. E. Nikitopoulos, and S. Acharya
Impact resistance of a composite laminate bonded to a metal substrate, Jack E. Helms and Guoqiang Li
Experimental study of low velocity impact response of composite laminates at elevated temperature, Samuel I. Ibekwe, Guoqiang Li, Su-Seng Pang, and Simeon Orji
Elastic modulus prediction of asphalt concrete, G. Li, Y. Li, J.B. Metcalf, and S.-S. Pang
Local buckling analysis of composite laminate with large delaminations induced by low velocity impact, G. Li, S.-S. Pang, Y. Zhao, and S.I. Ibekwe
Local buckling analysis of composite laminate with large delaminations induced by low velocity impact, Guoqiang Li, Su-Seng Pang, Yi Zhao, and Samuel I. Ibekwe
Analytical modeling of particle size and cluster effects on particulate-filled composite, G. Li, Y. Zhao, and S.-S. Pang
Four-phase sphere modeling of effective bulk modulus of concrete, G. Li, Y. Zhao, and S.-S. Pang
Effective Young's modulus estimation of concrete, G. Li, Y. Zhao, S.-S. Pang, and Y. Li
Laboratory studies on cement-asphalt emulsion composite, G. Li, Y. Zhao, S.-S. Pang, L. Wei, and X. Deng
Temperature dependence of inductively coupled plasma assisted growth of TiN thin films, W. J. Meng, T. J. Curtis, L. E. Rehn, and P. M. Baldo
Operations planning in a supply chain system with fixed-interval deliveries of finished goods to multiple customers, Gyana R. Parija and Bhaba R. Sarker
Operations planning in a supply chain system with fixed-interval deliveries of finished goods to multiple customers, Gyana R. Parija and Bhaba R. Sarker
Operations planning for a multi-stage kanban system, Bhaba R. Sarker and Chidambaram V. Balan
Relative performances of similarity and dissimilarity measures, Bhaba R. Sarker and Khan M. Saiful Islam
Grouping efficiency measures in cellular manufacturing: A survey and critical review, B. R. Sarker and S. Mondal
Marangoni effects on the motion of an expanding or contracting bubble pinned at a submerged tube tip, H. Wong, D. Rumschitzki, and C. Maldarelli
Maintenance data quality decision support system, Alan Zablah and Gerald M. Knapp
Submissions from 1998
A hazard analysis system for robotic work cells, Fereydoun Aghazadeh, Robert Chapleski, and Robert Hirschfeld
Models for lifting load capacity of Indonesian population, Fereydoun Aghazadeh, Sherif M. Waly, and Dedik S. Santoso
Some aspects of measuring maintenance performance in the process industry, R. H.P.M. Arts, Gerald M. Knapp, and Lawrence Mann
Influence of VDT monitor positions on discomfort and performance of users with or without bifocal lenses., R. Balci and F. Aghazadeh
Structure of square coaxial nozzle flows, Jason W. Bitting, Dimitris E. Nikitopoulos, Ephraim J. Gutmark, and Sivaram Gogineni