Submissions from 2003
Repair of damaged RC columns using fast curing FRP composites, G. Li, S. Hedlund, S.-S. Pang, W. Alaywan, J. Eggers, and C. Abadie
Development of High-Pressure Composite Butt-Weld Joints, G. Li, J.E. Helms, and S.-S. Pang
Investigation into FRP repaired RC columns, G. Li, S. Kidane, S.-S. Pang, and J.E. Helms
Investigation into FRP repaired RC columns, G. Li, S. Kidane, S.-S. Pang, J.E. Helms, and M.A. Stubblefield
Fast repair of laminated beams using UV curing composites, G. Li, N. Pourmohamadian, A. Cygan, J. Peck, J.E. Helms, and S.-S. Pang
Investigation into FRP repaired RC columns, Guoqiang Li, Samuel Kidane, Su Seng Pang, and Jack E. Helms
Health risks from exposure to metal-working fluids in machining and grinding operations, Kun Li, Fereydoun Aghazadeh, Selen Hatipkarasulu, and Thomas G. Ray
Structure and mechanical properties of Ti-Si-N ceramic nanocomposite coatings, W. J. Meng, X. D. Zhang, B. Shi, J. C. Jiang, L. E. Rehn, P. M. Baldo, and R. C. Tittsworth
Modeling and validation of a molded polycarbonate continuous flow polymerase chain reaction device, Michael W. Mitchell, Xuezhu Liu, Yannick Bejat, Dimitris E. Nikitopoulos, Steven A. Soper, and Michael C. Murphy
Bubble size effects on dispersed phase motion in vertical bubbly pipe flow, D. E. Nikitopoulos, J. Fiedler, M. Dowden, and E. Evans
Comparisons of initially turbulent, low-velocity-ratio circular and square coaxial jets, Dimitris E. Nikitopoulos, Jason W. Bitting, and Sivaram Gogineni
Fast joining of composite pipes using UV curing FRP composites, S.-S. Pang, G. Li, H.D. Jerro, J.A. Peck, M.A. Stubblefield, and S. Hasan
Flow characterization and performance of a powder lubricated slider bearing, Manjunath Pappur and M. M. Khonsari
On the thermoelastic instability of a thin-film-lubricated sliding contact: A closed-form solution, Z. C. Peng, M. M. Khonsari, and M. D. Pascovici
The effect of material flow and workload on the performance of machine location heuristics, Bhaba R. Sarker
Intrinsic stresses and mechanical properties of Ti-containing hydrocarbon coatings, Bo Shi and W. J. Meng
Configuring flexible flowlines, Manbir S. Sodhi and Bhaba R. Sarker
Biomechanics and electromyography of a common idiopathic low back disorder, Moshe Solomonow, Selen Hatipkarasulu, Bing He Zhou, Richard V. Baratta, and Fereydoun Aghazadeh
Cryopreservation of canine spermatozoa: theoretical prediction of optimal cooling rates in the presence and absence of cryoprotective agents, Sreedhar Thirumala, Maria S. Ferrer, Abdul Al-Jarrah, Bruce E. Eilts, Dale L. Paccamonti, and Ram V. Devireddy
Effects of complex aural stimuli on mental performance., Mohit Vij, Fereydoun Aghazadeh, Thomas G. Ray, and Selen Hatipkarasulu
Corrosion and biaxial fatigue of welded structures, M. A. Wahab and M. Sakano
Grain-boundary grooving by surface diffusion with strong surface energy anisotropy, T. H. Xin and H. Wong
Models for a family of products with shelf life, and production and shortage costs in emerging markets, Yi Xu and Bhaba R. Sarker
Directional decomposition heuristic for a linear machine-cell location problem, Junfang Yu and Bhaba R. Sarker
Submissions from 2002
Micromolding of Pb and Zn with surface engineered LiGA mold inserts, D. M. Cao, D. J. Guidry, W. J. Meng, and K. W. Kelly
Multiphase digital particle image velocimetry in a dispersed, bubbly, axisymmetric jet, G. Chaine and D. E. Nikitopoulos
Effects of polydispersity of chainlike aggregates on light-scattering properties and data inversion, Tryfon T. Charalampopoulos and Guocai Shu
Estrogen improves response accuracy and attenuates the disruptive effects of delta9-THC in ovariectomized rats responding under a multiple schedule of repeated acquisition and performance, Jill M. Daniel, Peter J. Winsauer, Ian N. Brauner, and Joseph M. Moerschbaecher
Multiple setup PCB assembly planning using genetic algorithms, Shantanu Deo, Roya Javadpour, and Gerald M. Knapp
Determining manufacturing batch sizes for a lumpy delivery system with trend demand, Ahmad Diponegoro and Bhaba R. Sarker
Epitaxial Growth and Erosion on (110) Crystal Surfaces: Structure and Dynamics of Interfacial States, Leonardo Golubović, Artem Levandovsky, and Dorel Moldovan
Epitaxial growth erosion on (110) crystal surfaces: Structure and dynamics of interfacial states, Leonardo Golubović, Artem Levandovsky, and Dorel Moldovan
Buckling analysis of a taper-taper adhesive-bonded composite joint, J.E. Helms, G. Li, and S.-S. Pang
Shear strength characteristics of an ultrasonic welded lap shear joint, S. Ibekwe, P.F. Mensah, A. Jana, G. Li, and M.A. Stubblefield
On the formation of hot spots in wet clutch systems, J. Y. Jang and M. M. Khonsari
Self-similar growth of multiple compound layers in binary diffusion couples with application to the "multi-foil" method, W. X. Kan and H. Wong
Preliminary analysis of grid stiffened composite cylinders, S. Kidane, E. Wodesenbet, G. Li, J. Helms, and B.H. Smith
Materials Research Society Symposium - Proceedings: Preface, Ashok Kumar, Wen Jin Meng, Yang Tse Cheng, Jeffrey S. Zabinski, Gary L. Doll, and Stan Veprek
Stiffness degradation of FRP strengthened RC beams subjected to hygrothermal and aging attacks, G. Li, S.-S. Pang, J.E. Helms, D. Mukai, S.I. Ibekwe, and W. Alaywan
Development of high pressure composite butt-weld joint, G. Li, S.-S. Pang, R.J. Jones, M. Hale, B.T. McCurry, and K. Schmit
Application of analysis of variance to wet clutch engagement, M. Mansouri, M. M. Khonsari, M. H. Holgerson, and W. Aung
Materials Research Society Symposium: Preface, Wen Jin Meng, Ashok Kumar, Gary L. Doll, Yang Tse Cheng, Stan Veprek, and Yip Wah Chung
Microstructure and mechanical properties of Ti-Si-N coatings, W. J. Meng, X. D. Zhang, B. Shi, R. C. Tittsworth, L. E. Rehn, and P. M. Baldo
A model of migrating grain-boundary grooves with application to two mobility-measurement methods, D. H. Min and H. Wong
Response to technical note on ‘manufacturing batch size and ordering policy for products with shelf lives’, Bhaba R. Sarker and Mahbubur R. Chowdhury
Common parts grouping heuristic: An iterative procedure to cell formation, David Sathiaraj and Bhaba R. Sarker
Intrinsic stress development in Ti-C:H ceramic nanocomposite coatings, B. Shi, W. J. Meng, L. E. Rehn, and P. M. Baldo
Interaction of physical and mental work, Sukhvinder Singh, Fereydoun Aghazadeh, and Thomas G. Ray
Bubbly pipe flow study via refractive index matching, K. N. Stanley, D. E. Nikitopoulos, and M. A. Khan
Equipment assignment to multiple overhaul blocks in series systems, Md Shabbir Talukder and Gerald M. Knapp
Locating cells with bottleneck machines in cellular manufacturing systems, Shaojun Wang and Bhaba R. Sarker
Coupled grooving and migration of inclined grain boundaries: Regime I, H. F. Zhang and H. Wong
Coupled grooving and migration of inclined grain boundaries: Regime II, H. F. Zhang and H. Wong
Evaporation, condensation, and flow in an idealized micro heat pipe, Jin Zhang and Harris Wong
Evaporation, condensation, and flow in an idealized micro heat pipe, Jin Zhang and Harris Wong
Submissions from 2001
Heat transfer enhancements in rotating two-pass coolant channels with profiled ribs: Part 1-average results, S. Acharya, V. Eliades, and D. E. Nikitopoulos
Visualization and two-color DPIV measurements of flows in circular and square coaxial nozzles, J. W. Bitting, D. E. Nikitopoulos, S. P. Gogineni, and E. J. Gutmark
Friction and wear characteristics of ceramic nanocomposite coatings: Titanium carbide/amorphous hydrocarbon, D. M. Cao, B. Feng, W. J. Meng, L. E. Rehn, P. M. Baldo, and M. M. Khonsari
Amorphous hydrocarbon based thin films for high-aspect-ratio MEMS applications, D. M. Cao, T. Wang, B. Feng, W. J. Meng, and K. W. Kelly
Manufacturing batch size and ordering policy for products with shelf lives, Mahbubur R. Chowdhury and Bhaba R. Sarker
Mass-Transfer Distribution in Rotating, Two-Pass, Ribbed Channels with Vortex Generators, V. Eliades, D. E. Nikitopoulos, and S. Acharya
Characterization of microstructure and mechanical behavior of sputter deposited Ti-containing amorphous carbon coatings, B. Feng, D. M. Cao, W. J. Meng, J. Xu, R. C. Tittsworth, L. E. Rehn, P. M. Baldo, and G. L. Doll
A fuzzy scheme for failure mode screening, Daniel J. Fonseca and Gerald M. Knapp
Impact response of a composite laminate bonded to a metal substrate, J.E. Helms, G. Li, and S.-S. Pang
Analysis of grid stiffened cylinders, J.E. Helms, G. Li, and B.H. Smith
Influence of temperature variation on the post impact strength of Glass Fiber Composite materials, Samuel I. Ibekwe, Guoqiang Li, Patrick F. Mensah, and Su Seng Pang
Influence of temperature variation on the post impact strength of Glass Fiber Composite materials, S.I. Ibekwe, G. Li, P.F. Mensah, and S.-S. Pang
Experimental and analytical strength characterization of an ultrasonic welded lap shear joint, S. Ibekwe, P.F. Mensah, G. Joshi, G. Li, and M. Stubblefield
On the thermohydrodynamic analysis of a Bingham fluid in slider bearings, J. Y. Jang and M. M. Khonsari
Development of a heat-activated coupling for composite pipe systems, R.A. Jones, S.-S. Pang, G. Li, R.H. Lea, and M.A. Stubblefield
Influence of inlet conditions on the thermohydrodynamic state of a fully circumferentially grooved journal bearing, P. S. Keogh and M. M. Khonsari
Durability of FRP strengthened RC beams subjected to hygrothermal and aging attacks, G. Li, J.E. Helms, S.-S. Pang, and S.I. Ibekwe
Analytical modeling of tensile strength of particulate-filled composites, G. Li, J.E. Helms, S.-S. Pang, and K. Schulz
Joining composite pipes using hybrid heat-activated coupling and adhesive bonding, G. Li, S.-S. Pang, J.E. Helms, R.J. Jones, and E. Woldesenbet
Investigation of prepreg bonded composite single lap joint, G. Li, S.-S. Pang, E. Woldesenbet, M.A. Stubblefield, P.F. Mensah, and S.I. Ibekwe
Joining composite pipes using hybrid heat-activated coupling and adhesive bonding, Guoqiang Li, Su Seng Pang, Jack E. Helms, Randy J. Jones, and Eyassu Woldesenbet
Thermal and dynamic characterization of wet clutch engagement with provision for drive Torque, M. Mansouri, M. Holgerson, M. M. Khonsari, and W. Aung
Modeling of heat-activated coupled composite pipes in a cryogenic thermal environment, P.F. Mensah, M.A. Stubblefield, O. Soysal, and G. Li
Numerical model for thermal and material characterization of FRP composite pipes exposed to hydrocarbon fire, P.F. Mensah, M.A. Stubblefield, O. Soysal, and G. Li
Heat transfer enhancements in rotating two-pass coolant channels with profiled ribs: Part 2-detailed measurements, D. E. Nikitopoulos, V. Eliades, and Acharya S
Nonlinear three-mode interactions in a developing mixing layer, D. E. Nikitopoulos and J. T.C. Liu
Influence of ultraviolet radiation on the Low velocity impact response of laminated composite, S.-S. Pang, J.E. Helms, G. Li, and S.I. Ibekwe
Influence of ultraviolet radiation on the low velocity impact response of laminated beams, S.-S. Pang, G. Li, J.E. Helms, and S.I. Ibekwe
Scuffing failure of hydrodynamic bearings due to an abrasive contaminant partially penetrated in the bearing over-layer, Mircea D. Pascovici and M. M. Khonsari
Measures of grouping efficiency in cellular manufacturing systems, Bhaba R. Sarker
A comparison of existing grouping efficiency measures and a new weighted grouping efficiency measure, Bhaba R. Sarker and Muslema Khan
Designing a mixed-model, open-station assembly line using mixed-integer programming, B. Sarker and H. Pan
Job routing and operations scheduling: A network-based virtual cell formation approach, B. R. Sarker and Z. Li
Designing a mixed-model, open-station assembly line using mixed-integer programming, B. R. Sarker and H. Pan
Design configuration for a closed-station, mixed-model assembly line: A filing cabinet manufacturing system, B. R. Sarker and Haixu Pan
A new continuum scalar model of facets, Tinghui Xin and Harris Wong
A δ-function model of facets, Tinghui Xin and Harris Wong
Submissions from 2000
Heat transfer enhancements in rotating two-pass coolant channels with profiled ribs: Part 1- average results, S. Acharya, V. Eliades, and D. E. Nikitopoulos
Mass/heat transfer in a ribbed passage with cylindrical vortex generators: The effect of generator-rib spacing, S. Acharya, R. G. Hibbs, Y. Chen, and D. E. Nikitopoulos
A strategy to design a work-rest schedule for VDT operators performing data entry and mental tasks, Rana Balci and Fereydoun Aghazadeh
Detailed mass transfer distribution in a ribbed coolant passage with a 180° bend, Y. Chen, D. E. Nikitopoulos, R. Hibbs, S. Acharya, and T. A. Myrum
Expert system for reliability centered maintenance in the chemical industry, D. J. Fonseca and G. M. Knapp
Visualization and dpiv measurements of non-circular coaxial jet flows, Sivaram Gogineni, Jason W. Bitting, and Dimitris E. Nikitopoulos
A similarity coefficient measure and machine-parts grouping in cellular manufacturing systems, Khan Md Saiful Islam and Bhaba R. Sarker