Submissions from 1996
Cell formation with operation times of jobs for even distribution of workloads, B. R. Sarker and C. V. Balan
Bubble measurements in a gas-liquid jet, Kevin N. Stanley and Dimitris E. Nikitopoulos
Development of an automated system to enhance the utilization of industrial residuals in Louisiana, Amer Tufail, Daniel Fonseca, Roger K. Seals, Gerald Knapp, and David Odom
Lot sizing with inventory-level dependent demand and deterioration, Avinash M. Waikar and Bhaba R. Sarker
Deposition and thinning of the human tear film, H. Wong, I. Fatt, and C. J. Radke
On the surfactant mass balance at a deforming fluid interface, H. Wong, D. Rumschitzki, and C. Maldarelli
Submissions from 1995
Statistical-based or condition-based preventive maintenance?, Lawrence Mann, Anuj Saxena, and Gerald M. Knapp
Simulation of a particle laden mixing layer including large-eddy effects, H. Ning, S. Acharya, and D. E. Nikitopoulos
Travel time models in automated storage/retrieval systems: A critical review, Bhaba R. Sarker and P. Sobhan Babu
Minimization of cost of idle and utility times of operators in a mixed-model assembly line, Bhaba R. Sarker and Haixu Pan
Response, Bhaba R. Sarker and Gyana R. Parija
Backtracking of jobs in one-dimensional machine location problems, Bhaba R. Sarker, Wilbert E. Wilhelm, Gary L. Hogg, and Min Hong Han
A balanced maintenance schedule for a failure-prone system, Bhaba R. Sarker and Junfang Yu
Non-intrusive measurements in dispersed, bubbly pipe flow, K. N. Stanley, M. A. Khan, and D. E. Nikitopoulos
Non-intrusive measurements of bubble size and velocity, A. L. Tassin and D. E. Nikitopoulos
A comparative study of some priority dispatching rules under different shop loads, Avinash M. Waikar, Bhaba R. Sarker, and Anil M. Lal
Occupational diseases in performing artists, A. Ward and F. Aghazadeh
THE MOTION OF LONG BUBBLES IN POLYGONAL CAPILLARIES .1. THIN-FILMS, H. Wong, C. J. Radke, and S. Morris
THE MOTION OF LONG BUBBLES IN POLYGONAL CAPILLARIES .2. DRAG, FLUID PRESSURE AND FLUID-FLOW, H. Wong, C. J. Radke, and S. Morris
Submissions from 1994
Relationship between posture and lifting capacity, F. Aghazadeh and H. Lu
Modification of CAPP systems for CAPP/scheduling integration, T. W. Liao, E. R. Coates, F. Aghazadeh, L. Mann, and N. Guha
Psychophysical determination and modeling of load carrying capacity, H. Lu and F. Aghazadeh
An experimental investigation of pure-Substance, adiabatic two-Phase flow in a vertical pipe, D. E. Nikitopoulos and P. F. Maeder
A survey and critical review of flexibility measures in manufacturing systems, Bhaba R. Sarker, Sembian Krishnamurthy, and Srinivasa G. Kuthethur
Effects of inflation and the time value of money on order quantity and allowable shortage, Bhaba R. Sarker and Haixu Pan
An optimal batch size for a production system operating under a fixed-quantity, periodic delivery policy, Bhaba R. Sarker and Gyana R. Parija
Backtracking and its amoebic properties in one-dimensional machine location problems, Bhaba R. Sarker, Wilber E. Wilhelm, and Gary L. Hogg
Measures of backtracking and bi-directional flow in one dimensional machine location problems, Bhaba R. Sarker, Wilbert E. Wilhelm, and Gary L. Hogg
Evaluation of a class-based storage scheduling technique applied to dual-shuttle automated storage and retrieval systems, B. R. Sarker, Lawrence Mann, and Jose R.G. Le Al Dos Santos
A two-phase procedure for duplicating bottleneck machines in a linear layout, cellular manufacturing system, B. R. Sarker and J. Yu
Non-intrusive measurements in a turbulent axisymmetric bubbly jet, Kevin N. Stanley and Dimitris E. Nikitopoulos
Characteristics and cost analysis of injuries & illnesses in poultry processing operations in louisiana, C. Vellala, John C. Pine, Brian D. Marx, A. James Farr, Frederick E. Sistler, and F. Aghazadeh
Submissions from 1993
Industrial robot use: survey results and hazard analysis, Fereydoun Aghazadeh, Robert Hirschfeld, and Robert Chapleski
Impact of anthropometric and personal variables on grip strength., F. Aghazadeh, K. Lee, and A. Waikar
Determination of the maximum acceptable weights of lifting and lowering using the direct estimation method, F. Aghazadeh, H. Lu, and S. J. Morrisey
Survey of robot safety in industry, R. A. Hirschfeld, F. Aghazadeh, and R. C. Chapleski
An optimal batch size for a production system operating under a just-in-time delivery system, A. M.M. Jamal and Bhaba R. Sarker
Determination of optimal location for parachute ripcord handle in a suspended position, N. T. Latif, F. Aghazadeh, A. M. Waikar, and K. S. Lee
Modification of CAPP systems for CAPP/scheduling integration, T. W. Liao, E. R. Coates, F. Aghazadeh, L. Mann, and N. Guha
VDT positions: Effect of performance and comfort, H. Lu and F. Aghazadeh
Mach number scaling of single-component, two-phase flow, D. E. Nikitopoulos
Large-scale effects incorporated into free-shear layer calculations by using non-linear stability principles, H. Ning, D. E. Nikitopoulos, and S. Acharya
Effect of production cost on shelf life, Bhaba R. Sarker and P. Sobhan Babu
A reply to ‘A note on “Economic manufacturing quantity in a just-in-time delivery system”’, B. R. Sarker and D. Y. Golhar
Submissions from 1992
Prediction of the maximum acceptable weight of symmetrical and asymmetrical lift using direct estimation method, F. Chen, F. Aghazadeh, and K. S. Lee
Utilization of direct estimation method to predict the maximum acceptable weight of symmetrical and asymmetrical lift, Fenc Chen, Feredyoun Aghazadeh, and Kwan Suk Lee
Economic manufacturing quantity in a just-in-time delivery system, Damodar Y. Golhar and Bhaba R. Sarker
Infogrip Chordic Keyboard evaluation, H. Lu and F. Aghazadeh
2-DIMENSIONAL MENISCI IN NONAXISYMMETRIC CAPILLARIES, H. Wong, S. Morris, and C. J. Radke
3-DIMENSIONAL MENISCI IN POLYGONAL CAPILLARIES, H. Wong, S. Morris, and C. J. Radke
Submissions from 1991
Service time distributions and the performance of a pull system: A simulation study, Bhaba R. Sarker
Performance evaluation of a double shuttle automated storage and retrieval system, Bhaba R. Sarker, Arvindh Sabapathy, Anil M. Lal, and Min Hong Han
Evaluating lifting tasks using subjective and biomechanical estimates of stress at the lower back, A. Waikar, L. Lee, F. Aghazadeh, and C. Parks
Submissions from 1990
Endurance in restricted postures, K. Lee, F. Aghazadeh, A. Waiker, and M. Allen
Maximum acceptable weight of lift for side and back lifting., K. Lee, A. Waikar, and F. Aghazadeh
Some basic physics of evaporating two-phase flow obtained through a two-fluid model, D. E. Nikitopoulos
Submissions from 1988
Some considerations in the use of isometric, isoinertial and isokinetic strength models for predicting lifting capability, F. Aghazadeh and B. C. Jiang
Submissions from 1987
A system for measurement of isokinetic strength for estimation of load handling capacity, F. Aghazadeh and M. M. Ayoub
Injuries due to handtools. Results of a questionnaire, F. Aghazadeh and A. Mital
Psychophysical lifting capabilities for overreach heights, Anil Mital and F. Aghazadeh
Submissions from 1986
Dynamic strength models for manual handling of different containers., F. Aghazadeh
Relative importance of isometric and isokinetic lifting strengths in estimating maximum lifting capabilities, Anil Mital, F. Aghazadeh, and Waldemar Karwowski
Submissions from 1985
A comparison of dynamic- and static-strength models for prediction of lifting capacity, F. Aghazadeh and M. M. Ayoub