Submissions from 2008
Estimation of throughput capacity for convoy movement, Bhaba R. Sarker and E. Alex Baylot
Optimal batch sizing in a multi-stage production system with rework consideration, Bhaba R. Sarker, A. M.M. Jamal, and Sanjay Mondal
Modern Applications of Nanotechnology in Textiles, A.P.S. Sawhney, B. Condon, K.V. Singh, S.S. Pang, G. li, and D. Hui
Heat/mass transfer in rotating, smooth, high aspect-ratio (4:1) coolant channels with curved walls in 90° and 45° orientation, Eashwar Sethuraman, Dimitris E. Nikitopoulos, and Sumanta Acharya
Simulation study on stress and deformation of polymeric patterns during the demolding process in thermal imprint lithography, Zhichao Song, Junseo Choi, Byoung Hee You, Jaejong Lee, and Sunggook Park
Study on demolding temperature in thermal imprint lithography via finite element analysis, Zhichao Song, Byoung Hee You, Jaejong Lee, and Sunggook Park
Effects of oil inlet pressure and inlet position of axially grooved infinitely long journal bearings. Part I: Analytical solutions and static performance, J. K. Wang and M. M. Khonsari
Effects of oil inlet pressure and inlet position of axially grooved infinitely long journal bearings. Part II: Nonlinear instability analysis, J. K. Wang and M. M. Khonsari
Basic solution of four parallel non-symmetric permeable Mode-III cracks in a piezoelectric/piezomagnetic composite plane, Z.-G. Zhou, P.-W. Zhang, and G.-Q. Li
Submissions from 2007
Intracellular ice formation in cell suspensions measured using a cryomicroscope and a calorimeter, Tathagata Acharya and Ram V. Devireddy
Mechanics in naturally compliant structures, M. S. Alam, M. A. Wahab, and C. H. Jenkins
System modeling of explosively actuated valves, Adam M. Brand, Keith A. Gonthier, and Michele E. Decroix
Fabrication of high-aspect-ratio microscale Ta mold inserts with micro electrical discharge machining, D. M. Cao, J. Jiang, J. Jiang, W. J. Meng, and W. Wang
Metal micromolding: Further experiments and preliminary finite element analysis, D. M. Cao, J. Jiang, W. J. Meng, and G. B. Sinclair
Adhesively bonded smart composite joints: An overview, J. Cheng, G. Li, and S.-S. Pang
Analysis of an adhesively bonded single-strap joint integrated with shape memory alloy (SMA) reinforced layers, J. Cheng, X. Wu, G. Li, S.-S. Pang, and F. Taheri
Design and analysis of a smart composite pipe joint system integrated with piezoelectric layers under bending, J. Cheng, X. Wu, G. Li, S.-S. Pang, and F. Taheri
Design and analysis of a smart adhesive single-strap joint system integrated with the piezoelectrics reinforced composite layers, J. Cheng, X. Wu, G. Li, F. Taheri, and S.-S. Pang
Assessment and improvement of the thermal performance of a polycarbonate micro Continuous Flow Polymerase Chain Reactor (CFPCR), Pin Chuan Chen, Michael W. Mitchell, Dimitris E. Nikitopoulos, Steven A. Soper, and Michael C. Murphy
Replication of reliable assembly features for polymer modular microfluidic systems, Pin Chuan Chen, Byoung Hee You, Daniel S. Park, Sunggook Park, Jason Guy, Dimitris E. Nikitopoulos, Steven A. Soper, and Michael C. Murphy
Operations policy for a supply chain system with fixed-interval delivery and linear demand, A. Diponegoro and B. R. Sarker
Granular collision lubrication: Experimental investigation and comparison to theory, Karim N. Elkholy and M. M. Khonsari
Effects of applied substrate bias during reactive sputter deposition of nanocomposite tantalum carbide/amorphous hydrocarbon thin films, R. D. Evans, G. L. Doll, W. J. Meng, F. Mei, and J. T. Glass
Cryopreservation characteristics of adipose-derived stem cells: maintenance of differentiation potential and viability, Brian C. Goh, Sreedhar Thirumala, Gail Kilroy, Ram V. Devireddy, and Jeffrey M. Gimble
Predictions for the impact of a granular solid having spatially non-uniform bulk porosity, Keith A. Gonthier and Carey F. Cox
Modeling of an explosively driven micro-valve, Keith A. Gonthier, Biaise H. Paul, Adam M. Braud, and Michele E. Decroix
The study of thermal properties and micro structures of YSZ, S. M. Guo, M. B. Silva, Patrick F. Mensah, and Nalini Uppu
Analytical modeling of three-layered HMA mixtures, B. Huang, X. Shu, G. Li, and L. Chen
Evaluation of micromilled metal mold masters for the replication of microchip electrophoresis devices, Mateusz L. Hupert, W. Jason Guy, Shawn D. Llopis, Hamed Shadpour, Sudheer Rani, Dimitris E. Nikitopoulos, and Steven A. Soper
Impact and post impact response of laminated beams at low temperatures, S.I. Ibekwe, P.F. Mensah, G. Li, S.-S. Pang, and M.A. Stubblefield
On the elastohydrodynamic analysis of shear-thinning fluids, J. Y. Jang, M. M. Khonsari, and S. Bair
Effects of internal linkage groups of fluorinated diamine on the optical and dielectric properties of polyimide thin films, Wonbong Jang, Daeyong Shin, Seunghyuk Choi, Sunggook Park, and Haksoo Han
Further experiments and modeling for microscale compression molding of metals at elevated temperatures, J. Jiang, W. J. Meng, G. B. Sinclair, and E. Lara-Curzio
Replication of metal-based microscale structures, J. Jiang, W. J. Meng, G. B. Sinclair, C. O. Stevens, and E. Lara-Curzio
Membrane transport properties of equine and macaque ovarian tissues frozen in mixtures of dimethylsulfoxide and ethylene glycol, A. Kardak, S. P. Leibo, and R. Devireddy
Deposition of particles on ocular tissues and formation of Krukenberg spindle, hyphema, and hypopyon, Satish Kumar, Sumanta Acharya, and Roger Beuerman
Microstructure enhanced heat exchanger for pressurized water reactor, K. Lian, M. Zhang, G. Li, S.-S. Pang, Z.-G. Ling, C.-G. Liu, and S. Ibekwe
Experimental study of hybrid composite cylinders, G. Li
A generalized analytical modeling of grid stiffened composite structures, G. Li and J. Cheng
Experimental study of hybrid composite beams, G. Li, M. John, and D. Maricherla
Development of rubberized syntactic foam, G. Li and N. Jones
Advanced grid stiffened fiber reinforced plastic tube encased concrete cylinders, G. Li and D. Maricherla
Online tribology ball bearing fault detection and identification, B. Ling and M. M. Khonsari
Computational fluid dynamics analysis of turbulent flow within a mechanical seal chamber, Zhaogao Luan and M. M. Khonsari
Heat transfer analysis in mechanical seals using fin theory, Z. Luan and M. M. Khonsari
An experimental investigation of dimple effect on the stribeck curve of journal bearings, Xiaobin Lu and M. M. Khonsari
An experimental investigation of grease-lubricated journal bearings, Xiaobin Lu and M. M. Khonsari
An experimental study of grease-lubricated journal bearings undergoing oscillatory motion, Xiaobin Lu and M. M. Khonsari
Thermal influence on torque transfer of wet clutches in limited slip differential applications, Pär Marklund, Rikard Mäki, Roland Larsson, Erik Höglund, M. M. Khonsari, and Joonyoung Jang
Eutectic bonding of Al-based high aspect ratio microscale structures, Fanghua Mei, J. Jiang, and W. J. Meng
Molecular dynamics simulation of pore growth in lipid bilayer membranes in the presence of edge-active agents, Dorel Moldovan, Dinesh Pinisetty, and Ram V. Devireddy
Mesoscale modelling of grain growth and microstructure in polycrystalline materials, D. Moldovan and D. Wolf
An optimal batch size for an imperfect production system with quality assurance and rework, D. Ojha, B. R. Sarker, and P. Biswas
Optimization of the geometry for continuous flow pcr devices in a titer plate-based pcr multi-reactor platform, D. S. Park, P. C. Chen, B. H. You, N. Kim, T. Park, P. Datta, Y. Desta, S. A. Soper, D. E. Nikitopoulos, and M. C. Murphy
UV-cured FRP joint thickness effect on coupled composite pipes, J.A. Peck, R.A. Jones, S.-S. Pang, G. Li, and B.H. Smith
Molecular dynamics simulation studies of pore formation in lipid bilayers in the presence of dimethylsulfoxide, Dinesh Pinisetty, Raghava Alapati, Dorel Moldovan, and Ram V. Devireddy
Supply chain models for an assembly system with preprocessing of raw materials, Mohammad Anwar Ashek Rahman and Bhaba R. Sarker
Materials Selection and Applications in Mechanical Engineering, Aravamudhan Raman
A quadra-directional decomposition heuristic for a two-dimensional, non-equidistant machine-cell location problem, Bhaba R. Sarker and Junfang Yu
Superadiabatic combustion in conducting tubes and heat exchangers of finite length, Ingmar Schoegl and Janet L. Ellzey
Photon-beam lithography reaches 12.5 nm half-pitch resolution, Harun H. Solak, Yasin Ekinci, Philipp Käser, and Sunggook Park
Stress analysis of non-conventional composite pipes, M. A. Wahab, M. S. Alam, S. S. Pang, J. A. Peck, and R. A. Jones
Analytical formulation for the temperature profile by Duhamel's theorem in bodies subjected to an oscillatory heat source, Jun Wen and M. M. Khonsari
Transient temperature involving oscillatory heat source with application in fretting contact, Jun Wen and M. M. Khonsari
Theory of slope-dependent disjoining pressure with application to Lennard-Jones liquid films, Taeil Yi and Harris Wong
Theory of slope-dependent disjoining pressure with application to Lennard-Jones liquid films, Taeil Yi and Harris Wong
Dimensional and locational integrity in the replication of polymeric microdevices, Byoung Hee You, Daniel S. Park, Pin Chuan Chen, Wilfredo M. Caceres, Dimitris E. Nikitopoulos, Steven A. Soper, and Michael C. Murphy
Fluid flow and heat transfer in a dual-wet micro heat pipe, J. Zhang, S. J. Watson, and H. Wong
Submissions from 2006
Temperature analysis of a gasket for an internal combustion engine, Dae Kyun Back and M. M. Khonsari
Fretting behavior of a rubber coating: Friction characteristics of rubber debris, Dae Kyun Baek and M. M. Khonsari
Reynolds equations for common generalized Newtonian models and an approximate Reynolds-Carreau equation, Scott Bair and M. M. Khonsari
An improved production plan to minimize machine idle time, Pablo Biswas and Bhaba R. Sarker
Materials Research Society Symposium Proceedings: Preface, Steve J. Bull, Paul R. Chalker, Shao Chen Chen, Wen Jin Meng, and Roya Maboudian
Fabrication of high-aspect-ratio microscale mold inserts by parallel μEDM, D. M. Cao, J. Jiang, R. Yang, and W. J. Meng
Development of a smart composite pipe joint integrated with piezoelectric layers under tensile loading, J. Cheng, X. Wu, G. Li, F. Taheri, and S.-S. Pang
Performance of an electrokinetic shuttle PCR polymerase Chain reactor, Pin Chuan Chen, Jifeng Chen, Dimitris E. Nikitopoulos, Steven A. Soper, and Michael C. Murphy
Optimal inventory policy for specialty chemical products in multiple packages, E. J. Comeaux and B. R. Sarker
Metal micromolding with surface engineered inserts, D. M. Cuo, J. Jiang, and W. J. Meng
Modeling and fabrication of a micro thermocouple array, A. Z. Cygan, A. Kardak, D. Patterson, E. J. Podhala-Murphy, R. V. Devireddy, and M. C. Murphy
Permeability characteristics of ovine primordial follicles calculated with two parameter Kedem-Katchalsky formulation, R. V. Devireddy, C. A. Amorim, and S. P. Leibo
Suprazero cooling conditions significantly influence subzero permeability parameters of mammalian ovarian tissue, R. V. Devireddy, G. Li, and S. P. Leibo
Finite horizon planning for a production system with permitted shortage and fixed-interval deliveries, Ahmad Diponegoro and Bhaba R. Sarker
A delta-function model for axially symmetric crystals, P. Du and H. Wong
Design aspects and simulations of a modified micro-scale electrophoretron, Nada Elmajdoub, Dimitris E. Nikitopoulos, Steven A. Soper, and Michael C. Murphy
Directional cooling of adult stem cells, R. Fuller and R. V. Devireddy
Theory and analysis of non-ideal detonation for RDX-metal mixtures, Keith A. Gonthier and Chad G. Rumchik
Investigation into three-layered HMA mixtures, B. Huang, G. Li, and X. Shu
High-precision micromilling for low-cost fabrication of metal mold masters, Mateusz L. Hupert, W. Jason Guy, Shawn D. Llopis, Catherine Situma, Sudheer Rani, Dimitris E. Nikitopoulos, and Steven A. Soper
On the role of enduring contact in powder lubrication, J. Y. Jang and M. M. Khonsari
Low velocity impact response and residual strength of composite sandwich structures with hybrid syntactic foam core, M. John and G. Li
Effect of contamination on the performance of hydrodynamic bearings, M. M. Khonsari and E. R. Booser
Proper film thickness key to bearing survival, M. M. Khonsari and E. R. Booser
Pulsing to improve bubble column performance: I. Low gas rates, F. Carl Knopf, Jia Ma, Richard G. Rice, and Dimitris Nikitopoulos
Identification of composite beam delamination parameters, S.G. Krishna, K.V. Singh, S.-S. Pang, and G. Li
Identification of composite beam delamination parameters, Srinivas Gopal Krishna, Kumar V. Singh, Su Seng Pang, and Guoqiang Li
Numerical solution of ocular fluid dynamics in a rabbit eye: parametric effects, Satish Kumar, Sumanta Acharya, Roger Beuerman, and Arto Palkama
Interfacial states and far-from-equilibrium transitions in the epitaxial growth and erosion on (110) crystal surfaces, Artem Levandovsky, Leonardo Golubović, and Dorel Moldovan
Experimental study of FRP confined concrete cylinders, G. Li
Fast repair of damaged RC beams using UV curing FRP composites, G. Li and A. Ghebreyesus
Effect of fiber orientation on the structural behavior of FRP wrapped concrete cylinders, G. Li, D. Maricherla, K. Singh, S.-S. Pang, and M. John