Finite element modeling of mixed adhesive layer fracture mode for FRP web strengthening of steel bridges

Document Type

Article

Publication Date

11-1-2025

Abstract

Buckling of thin-walled web plates of steel girders can be delayed using bonded glass fiber reinforced plastic (GFRP) stiffeners using the strengthening-by-stiffening (SBS) strengthening technique. The stress state between the bonded adherents (steel web and GFRP stiffener) is complex, varies greatly pre-and post-buckling, and causes adhesion-and/or cohesion-dominant failure modes. Full-scale experiments of SBS-strengthened steel beams showed a need to investigate the fracture mode of the adhesive layer. A finite element model of the full-scale beams was built to study the adhesive layer using sub-modeling techniques considering different steel plate thicknesses, epoxy types, and initial crack to determine the phase angle shift during web buckling. It was observed that the SBS failure is controlled by a mixed mode that starts initially with a phase angle of 29◦; i.e., Mode II is the dominant failure mode during the linear phase. Thereafter, Mode I with a 59◦ phase angle became prevalent during the nonlinear phase of the behavior implying that the buckling-driven failure of web plate changes the phase angle.

Publication Source (Journal or Book title)

Canadian Journal of Civil Engineering

First Page

2092

Last Page

2103

This document is currently not available here.

Share

COinS