Title
A solid-phase bioreactor with continuous sample deposition for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry
Document Type
Article
Publication Date
3-1-2011
Abstract
We report the development of a solid-phase proteolytic digestion and continuous deposition microfluidic chip platform for low volume fraction collection and off-line matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. Tryptic peptides were formed in an on-chip bioreactor and continuously deposited onto a MALDI target plate using a motor-driven xyz stage. The bioreactor consisted of a 4 cm x 200 μm x 50 μm microfluidic channel with covalently immobilized trypsin on an array of 50 μm diameter micropost structures with a 50 μm edge-to-edge inter-post spacing. A 50 μm i.d. capillary tube was directly attached to the end of the bioreactor for continuous sample deposition. The MALDI target plate was modified by spin-coating a nitrocellulose solution containing a MALDI matrix on the surface prior to effluent deposition. Protein molecular weight standards were used for evaluating the performance of the digestion and continuous deposition system. Serpentine sample traces 200 μm wide were obtained with a 30 fmol/mm quantity deposition rate and a 3.3 nL/mm volumetric deposition rate. Copyright © 2011 John Wiley & Sons, Ltd.
Publication Source (Journal or Book title)
Rapid Communications in Mass Spectrometry
First Page
693
Last Page
699
Recommended Citation
Lee, J., Soper, S., & Murray, K. (2011). A solid-phase bioreactor with continuous sample deposition for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Rapid Communications in Mass Spectrometry, 25 (6), 693-699. https://doi.org/10.1002/rcm.4921