Comparative mechanical, fire-retarding, and morphological properties of high-density polyethylene/(wood flour) composites with different flame retardants

Document Type

Article

Publication Date

2-1-2018

Abstract

Aluminum hydroxide, magnesium hydroxide, and 1,2-bis(pentabromophenyl) ethane were incorporated into high-density polyethylene (HDPE) and wood flour composites, and their mechanical properties, morphology, and fire-retardancy performance were characterized. The addition of flame retardants slightly reduced the modulus of elasticity and modulus of rupture of composites. Morphology characterization showed reduced interfacial adhesion among wood flour, HDPE, and flame retardants in the composites compared with control composites (HDPE and wood flour composites without the addition of flame retardants). The flame retardancy of composites was improved with the addition of the flame retardants, magnesium hydroxide and 1,2-bis(pentabromophenyl) ethane, especially 1,2-bis(pentabromophenyl) ethane, with a significant decrease in the heat release rate and total heat release. Char residue composition and morphology, analyzed by attenuated total reflectance, Fourier-transform infrared spectroscopy, and scanning electron microscopy, showed that the char layer was formed on the composite surface with the addition of flame retardants, which promoted the fire performance of composites. The composites with 10 wt% 1,2-bis(pentabromophenyl) ethane had good fire performance with a continuous and compact char layer on the composite surface. J. VINYL ADDIT. TECHNOL., 24:3–12, 2018. © 2015 Society of Plastics Engineers.

Publication Source (Journal or Book title)

Journal of Vinyl and Additive Technology

First Page

3

Last Page

12

This document is currently not available here.

Share

COinS