Ultrathin surface coatings to enhance cycling stability of LiMn2O4 cathode in lithium-ion batteries

Document Type

Article

Publication Date

1-1-2013

Abstract

Spinel LiMn2O4 suffers from severe dissolution when used as a cathode material in rechargeable Li-ion batteries. To enhance the cycling stability of LiMn2O4, we use the atomic layer deposition (ALD) method to deposit ultrathin and highly conformal Al2O3 coatings (as thin as 0.6-1.2 nm) onto LiMn2O4 cathodes with precise thickness control at atomic scale. Both bare and ALD-coated cathodes are cycled at a specific current of 300 mA g-1 (2.5 C) in a potential range of 3.4-4.5 V (vs. Li/Li+). All ALD-coated cathodes exhibit significantly improved cycleability compared to bare cathodes. Particularly, the cathode coated with six Al2O3 ALD layers (0.9 nm thick) shows the best cycling performance, delivering an initial capacity of 101.5 mA h g-1 and a final capacity of 96.5 mA h g-1 after 100 cycles, while bare cathode delivers an initial capacity of 100.6 mA h g-1 and a final capacity of only 78.6 mA h g-1. Such enhanced electrochemical performances of ALD-coated cathodes are ascribed to the high-quality ALD oxide coatings that are highly conformal, dense, and complete, and thus protect active material from severe dissolution into electrolytes. Besides, cycling performances of coated cathodes can be easily optimized by accurately tuning coating thickness via varying ALD growth cycles. © 2012 Springer-Verlag.

Publication Source (Journal or Book title)

Ionics

First Page

1

Last Page

8

This document is currently not available here.

Share

COinS