Document Type
Article
Publication Date
1-1-2022
Abstract
Cable-driven continuum robots, which are robots with a continuously flexible backbone and no identifiable joints that are actuated by cables, have shown great potential for many applications in unstructured, uncertain environments. However, the standard design for a cable-driven continuum robot segment, which bends a continuous backbone along a circular arc, has many compliant modes of deformation which are uncontrolled, and which may result in buckling or other undesirable behaviors if not ameliorated. In this paper, we detail an approach for using additional cables to selectively stiffen planar cable-driven robots without substantial coupling to the actuating cables. A mechanics-based model based on the planar Cosserat equations is used to find the design conditions under which additional cables can be routed without coupling of the cable lengths for small deformations. Simulations show that even for relatively large deformations, coupling remains small. A prototype is evaluated, and it is demonstrated that the compliance of the robot is substantially modified relative to the same robot without stiffening cables. Additional stiffening cables are shown to increase the end-effector output stiffness by a factor of approximately 10 over a typical design with actuating cables.
Publication Source (Journal or Book title)
IEEE Access
First Page
104852
Last Page
104862
Recommended Citation
Molaei, P., Pitts, N., Palardy, G., Su, J., Mahlin, M., Neilan, J., & Gilbert, H. (2022). Cable Decoupling and Cable-Based Stiffening of Continuum Robots. IEEE Access, 10, 104852-104862. https://doi.org/10.1109/ACCESS.2022.3210120