Development of rubberized asphalt binder specification

Document Type

Article

Publication Date

12-1-2017

Abstract

The use of ground rubber from scrap tires has long been supported by environmental and government agencies to reduce the disposal problem associated with waste tires. In 2008, Louisiana turned to the use of crumb rubber in asphalt mixtures to address a shortage in polymer-modified asphalt binder. As a result, the state developed new specifications for rubberized asphalt binder, which was allowed as a substitute to polymer-modified asphalt binder. This study presents the research activities that led to the development of the Louisiana rubberized specifications. A laboratory experimental program was conducted to evaluate the performance of asphalt mixtures prepared with crumb rubber (CR) modified binder as compared to mixtures prepared with polymer-modified asphalt binder with and without reclaimed asphalt pavement. In addition, the field performance of test sections constructed with CR-modified binder was compared to a test section prepared with polymer-modified conventional mixtures under accelerated loading. Based on the results of the laboratory experimental program, it is concluded that the rutting and intermediate temperature fracture performances of CR-modified asphalt mixture were adequate and comparable to mixtures prepared with polymer-modified asphalt binder. Test results from the accelerated loading facility experiment showed that acceptable performance for asphalt mixtures can be achieved using either polymer-modified or CR-modified asphalt binders.

Publication Source (Journal or Book title)

Innovative Infrastructure Solutions

This document is currently not available here.

Share

COinS