Aerodynamics of ground-mounted solar panels: Test model scale effects

Document Type

Article

Publication Date

1-1-2013

Abstract

Most boundary-layer wind tunnels (BLWTs) were built for testing models of large civil engineering structures that have geometric scales ranging from 1:500 to 1:100. However, producing aerodynamic models of the solar panels at such scales makes the modules too small, resulting in at least two technical problems. First, the resolution of pressure data on such small models becomes low. Second, the test model may be placed in the lower portion of the boundary-layer that is not a true representative of a real world scenario, due to high uncertainty in wind velocity. To alleviate these problems, development of a standardized testing protocol is very important. Such protocol should account for different time and geometric scales to design appropriate wind tunnel experiments that can allow accurate assessment of wind loads on the solar panels. The current paper systematically investigates the sensitivity of wind loads to testing ground-mounted solar panels, both experimentally (in a BLWT) and numerically (by computational fluid dynamics (CFD)), at different geometric scales. While mean loads are not significantly affected by the model size, peak loads are sensitive to both the geometric scale and the spectral content of the test flow. However, when the objective is to predict 3-s (three seconds) peak loads, large models can be tested in a flow that has reduced high-frequency turbulence. © 2013 Elsevier Ltd.

Publication Source (Journal or Book title)

Journal of Wind Engineering and Industrial Aerodynamics

First Page

250

Last Page

260

This document is currently not available here.

Share

COinS